40_6.gif (6383 bytes)

40/6-60/6Models 40/6 and 60/6 are precision AC input signal conditioners with full galvanic isolation between the input, output and power supply circuitry. They provide the necessary cicuitry for amplification, rectification and processing of current or voltage signals from various AC sensors and signal sources. An optional LCD indicator is available for some models for local indication of the output in engineering units.The 40/6 and 60/6 can be easily ranged withoud requiring special tools or board modifications. Models 40/6N and 60/6N are special versions intended to be used for very low currents and low voltages as well as higher voltage measurements over frequenciens of up to 2KHz. The /6N versions also provide a full range of output capabilities including all current or voltage standards. For a 4-20mA output, a test terminal provides a 40-200mV signal which is proportional to the 4-20mA output. This signal is used for monitoring and verification of the output without interrupting or disconnecting the current loop.

To select the required  information, click on the relevant link.
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Datasheet(115 Kb)
         The file may be opened with Microsoft Word  Manual
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Wiring diagram
         The file may be opened with Microsoft Word  Configuration Instructions
         Ordering Information Ordering Information
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Mechanical drawing
          Photographs  Photographs
         Supplimentary Software Supplementary Software

                         Get Adobe Acrobat Reader