20_6n.gif (6021 bytes)

20-6VThe model 20/6 is a precision, loop powered 2-wire transmitter with galvanic isolation between its input and the current-loop output signal. The 20/6 provides the necessary circuitry for amplification, rectification and processing of AC Current or Voltage signals from various sensors and signal sources. An optional LCD indicator is available on the 20/6 to indicate the output in Engineering Units.The 20/6 can be easily ranged without requiring special tools or board modifications. The model 20/6N is a special version intended for very low current/voltage measurements and higher voltages over a wider frequency range of up to 2KHz. A TEST terminal provides a 40-200 mV signal proportional to the 4-20mA output. Applying a DVM to the TEST terminals allows monitoring and verification of the output without interrupting or disconnecting the current loop. 

To select the required  information, click on the relevant link.
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Datasheet(120 Kb)
         The file may be opened with Microsoft Word.  Manual
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Wiring diagram
         The file may be opened with Microsoft Word.  Configuration Instructions
         Ordering Information Ordering Information
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Mechanical drawing
          Photographs  Photographs
         Supplimentary Software Supplementary Software

                         Get Adobe Acrobat Reader