20_1.gif (5566 bytes)

20_1.jpg (100296 bytes)The model 20/1 is a precision, loop powered 2-wire transmitter with galvanic isolation between its input and the current-loop output signal. It provides the necessary circuitry for amplification and linearization of signals from RTD sensor. The input circuit can accept 2 or 3 wire RTD's for either a direct or a differential temperature measurement. An optional LCD indicator is available to indicate actual temperarure in °C or °F. The 20/1 can be easily ranged without requiring special tools or board modifications. The transmitter is a member of Mescon's family of advanced Universal Input transmitters, which may be readily reconfigured to accept other popular inputs such as Thermocouples, DC mV/mA/Volt and Potentiometers. A TEST terminal provides a 40-200 mV output. Applying a DVM to the TEST terminals allows monitoring and verification of the output without interrupting or disconnecting the current loop. 

To select the required  information, click on the relevant link.
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Datasheet(230 Kb)
         The file may be opened with Microsoft Word.  Manual
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Wiring diagram
         The file may be opened with Microsoft Word.  Configuration Instructions
         Ordering Information Ordering Information
          The file may be opened with Adobe Acrobat Reader.If your system does not contain it , you may download it. Click on the"Get Acrobat Reader" below.   Mechanical drawing
          Photographs  Photographs
         Supplimentary Software Supplementary Software

                         Get Adobe Acrobat Reader